SB1 SPRING BARS
Set of four spring bars to attach straps or bracelets to HELM watches. The HELM Miyako, Khuraburi and Vanuatu use 22mm spring bars while the Komodo uses 20mm spring bars. The rounded tips on these spring bars can make it a bit easier for the spring bars to find their way into the lug holes.
Note: These are shoulderless spring bars which should only be used in watch cases with lug holes that are drilled all the way through (otherwise, you won’t be able to remove them).
SPECIFICATIONS:
- Central Diameter: 2.0mm
- Length (full / compressed):
– 22mm bars: 25.5mm / 21.9mm
- Tip Diameter: 1.2 mm
- Quantity: 4 Spring Bars
US$2.00 + Shipping
SB1-V2 SPRING BARS
Set of four spring bars to attach straps or bracelets to HELM watches. The HELM Miyako, Khuraburi and Vanuatu use 22mm spring bars while the Komodo uses 20mm spring bars.
These spring bars were included with HELM watches for several years (and are still included with some watches) before we switched to the shoulderless spring bars above. These spring bars have shoulders, so they’re useful if you have a watch without drilled lugs. The tips of these spring bars also have a bit more “wiggle” which can sometimes make bracelet installation easier.
SPECIFICATIONS:
– 22mm bars: 25mm / 21.8mm
Set of four spring bars to attach straps or bracelets to HELM watches. The HELM Miyako, Khuraburi and Vanuatu use 22mm spring bars while the Komodo uses 20mm spring bars.
These spring bars were included with HELM watches for several years (and are still included with some watches) before we switched to the shoulderless spring bars above. These spring bars have shoulders, so they’re useful if you have a watch without drilled lugs. The tips of these spring bars also have a bit more “wiggle” which can sometimes make bracelet installation easier.
SPECIFICATIONS:
- Central Diameter: 2.0mm
- Length (full / compressed):
– 22mm bars: 25mm / 21.8mm
- Tip Diameter: 1.2mm
- Quantity: 4 Spring Bars
US$2.00 + Shipping
SB1-V1 SPRING BARS
Set of four spring bars to attach straps or bracelets to the first generation HELM Vanuatu.
These spring bars have a smaller tip diameter (0.8mm) since the lug holes on the first generation Vanuatu were drilled a bit smaller. These will also fit lug holes on many other watches since 0.8mm is a fairly common tip size. However, they are beefier than many spring bars because they do still have the 2.0mm central diameter.
SPECIFICATIONS:
– 22mm bars: 25mm / 21.7mm
Set of four spring bars to attach straps or bracelets to the first generation HELM Vanuatu.
These spring bars have a smaller tip diameter (0.8mm) since the lug holes on the first generation Vanuatu were drilled a bit smaller. These will also fit lug holes on many other watches since 0.8mm is a fairly common tip size. However, they are beefier than many spring bars because they do still have the 2.0mm central diameter.
SPECIFICATIONS:
- Central Diameter: 2.0mm
- Length (full / compressed):
– 22mm bars: 25mm / 21.7mm
- Tip Diameter: 0.8mm
- Quantity: 4 Spring Bars
US$2.00 + Shipping
SB2 SPRING BARS
Set of four spring bars to attach the FC1, FC1-Ti or FC3 clasps to their respective bracelets. (Note: The FC3 clasp only fits the SS4 bracelet). Each clasp uses two slightly different sized spring bars, so this set of four spring bars includes two spring bars of each size/type.
SPECIFICATIONS:
- Quantity: 4 Spring Bars